GIGAVAC GX11SAB DC Contactor
- 12Vdc low power coil with control circuit.
|Main Contact||SPST-NO (Form X)|
|Continuous Current (Amps)||150A|
|Coil Voltage||12Vdc, Low power|
|Dielectric At Sea Level (Leakage < 1mA)||2200 Vrms|
|Contact Voltage, Operating Max||800 Vdc|
|Auxilary Contact (2A, 24VDC)||NO (Normally Open)|
- Contactor has two coils. Both are used for pick-up, and then in approximately 75 milliseconds, one coil is electronically removed from the coil drive circuit. The remaining coil supplies low continuous hold power sufficient for the contactor to meet all of its specified performance specifications. This provides low coil power without PWM electronics that can cause EMI emissions and/or cross-talk on control power.
- For pick-up testing of contactors with dual coils, the voltage can not be ramped up slowly, but must be applied instantly to at least the maximum Pick-up Voltage. Otherwise, the contactor will not pick-up.
Check pdf for all details:
|GIGAVAC GX11SAB DC Contactor/Relay|
For other products please check product selection table: GX11 Series Contactors